How to Replace Your Own Brakes

It’s important to learn how to fix things on your own, should the need ever arise. But if you ever consider replacing your own brakes, know that you must always proceed with caution and that it is highly recommended that you approach a professional instead. Disastrous consequences may arise from poor brake repair, so don’t do it unless you’re willing to bet your life on your DIY abilities. Normally, professionals are tasked with this sort of thing, but considering that professional help might not be available in the event of an emergency, you’ll need to know how to do it yourself as a last resort.

Before you loosen that first lug nut, read everything in the car owner’s manual concerning the brake system. Learn about its specifications, especially the disc brake types and the size of brake shoes needed. Determine if there are any special preparations needed. By gathering as much relevant information as possible, you’ll prevent a lot of potential problems as you go about this DIY project.

Once that’s accomplished, gather all the tools you’ll need to install your brakes. Chocks, a car jack, and hand tools, among others will be needed for the process. Always have replacement parts on hand, just in case you need. You may need brake pads, shoes, or even a new brake rotor. Unfortunately, you won’t know what you need for certain until you’re actually in the brake system, so don’t panic if you don’t have everything that you need all at once. This is completely normal.

Make sure that the vehicle is on steady ground before you position the jack. Place chocks behind three of the wheels to help prevent the car from rolling off. Take note to loosen lug nuts on the tire before that section of the vehicle is lifted. Remove the lug nuts and the tire once it is off the ground to determine the condition of your brakes. Check for leaks. If there are none, wipe off any residue you find around your brakes. You may install new brake pads at this point. Also, make sure to replace any worn out brake shoes. From there, reverse the disassembly process and reassemble the components.

While you may be able to handle minor brake jobs yourself, major ones may require a complete replacement of your brake system. If that seems to be the case, do not hesitate to seek out professional services. This is an extremely complex task and chances are that you won’t be able to do it yourself! Understand the limits of your abilities and respect them. If you do so, you’ll not only be able to secure the safety and security of your loved ones, but also other individuals on the road.